Titanium alloy fan

Titanium alloy industrial fan

Product description: 1. Titanium fan has excellent anti-corrosion performance.
2. Compared with ordinary stainless steel, titanium has higher corrosion resistance.
3. Titanium encountered smoke nitric acid wil
INQUIRY

Working principle

According to the principle of converting kinetic energy into potential energy, the titanium fan uses a high-speed rotating impeller to accelerate the gas, then decelerates and changes the flow direction to convert the kinetic energy into potential energy pressure. In a single-stage centrifugal fan, the gas enters the impeller from the axial direction, the gas is converted to the radial direction by the impeller, and then enters the diffuser. In the diffuser, the gas changes the direction of flow, causing deceleration, converting kinetic energy into pressure energy. The pressure increase occurs mainly in the impeller, followed by the diffusion process. In a multi-stage fan, a flow reducer is used to bring the air into the lower impeller, creating a higher pressure.

Titanium fan is the 1 kind of machinery that relies on input mechanical energy to increase gas pressure and transport gas side by side, and it is the 1 kind of driven fluid machinery. The impeller and shell of the centrifugal fan are made of aluminum alloy, which is light in weight and has good corrosion resistance.

Product parameters

№	Drive Mode	Rotate Speed (r/min)	Total Pressure (pa)	Air Quantity (m³/h)	Effect(%)	Required Power (kw)	Power (kw)
9	D	1450	4933 4923 4854 4776 4698 4599 4482 4374	12519 14084 15649 17214 18779 20344 21908 23473	81.5 82.6 82.6 82.0 81.1 80.0 78.3 76.4	24.69 27.35 29.97 32.67 35.45 38.12 40.86 43.79	30 45
10	D	1450	6090 6071 6002 5894 5796 5678 5531 5394	17173 19320 21466 23613 25759 27906 30053 32199	81.5 82.6 82.6 82.0 81.1 80.0 78.3 76.4	41.82 46.27 50.83 55.31 59.99 64.55 69.18 74.08	55 75
11.2	D	1450	7640 7620 6522 7394 7277 7120 6943 6767	24127 27143 30158 33174 36190 39206 42222 45238	81.5 82.6 82.6 82.0 81.1 80.0 78.3 76.4	73.70 81.60 89.49 97.48 105.82 113.71 122.01 130.57	110 132

Repair

Titanium fan start and stop or operation, once found abnormal situation, should immediately check; centrifugal fan operation if found small common fault, should immediately find the cause and solve. If common faults cannot be removed or major common faults are found, please ask the after-sales service staff of the technical professional centrifugal fan to check and maintain. The centrifugal fan shall be terminated during all regular inspections and maintenance of the centrifugal fan. The grease of the centrifugal fan is replaced on time, especially after each disassembly and repair.

If there is a fault in the operation of the titanium fan, it is found that the fan flow has changed, it should be adjusted in time. If the flow is too large or too small, the throttling device should be used to adjust; when the titanium fan starts and stops or runs, once an abnormal phenomenon is found, it should be checked immediately. If a small or medium fault is found in the operation of the fan, the cause should be found out immediately and handled. If the fault cannot be eliminated or a major fault is found, professional fan after-sales personnel can be asked to check and repair; if there is any inspection or maintenance during fan operation, the fan should be stopped; the fan should be replaced with lubricating oil regularly, especially every time it is removed.

When the titanium fan is running normally, it is necessary to avoid the manual failure caused by improper maintenance. In order to prevent natural failures and accidents in all aspects of the titanium fan and motor, give full play to the performance of the equipment, and extend the service life of the equipment, it is necessary to strengthen the daily maintenance of the fan.
1. If the flow change is found during the use of the fan, it should be adjusted in time. If the flow is too large or too small, the throttling device should be used to adjust.
2. When the titanium fan starts and stops or runs, if any abnormal phenomenon is found, it should be checked immediately.
3. If a minor fault is found during the operation of the fan, the cause should be immediately identified and handled. If the fault cannot be eliminated or a major fault, please professional fan after-sales personnel to check and repair.
4. Fan inspection and maintenance, should stop the fan work.
Regularly replace the fan lubricating oil, especially after each repair.